KS 94 Temperature Controller with Cascade Control

The KS 94 single loop controller is configurable for ON/OFF control, PID control and motorised valve control. The output function can be configured for ?/Y/Off, position control, split-range control, and numerous 3-point combinations of switching/continuous control.

Control modes are set-point, set-point/cascade, and programmer, each with the possibility of setpoint offset. The effect of offset can be additive e.g. reduced standby set-point or as a factor e.g. O2 correction or split load. Offset can be triggered by an external contact, whereby the value is defined via an analog signal or via an adjustable parameter.

Get a Quote Data Sheet

Button Text
Categories: , Tags: ,

Additional information

Manufacturer

Series

Din Size

Segments

Programs

1-9
Outputs

Text/Graphic Display

Dimensions and Size

96m x 96mm x 160mm (HxWxD), 1/4 DIN
Connectors

Flat pin or screw terminals
Primary Input Type

Universal (TC, RTD, DC linear mA/mV)
Other Inputs

External setpoint, Ratio input, Three component input, Potentiometer input
Output Type

Relay, Current/logic output
Max. Number of Outputs:

11
Scan Time:

200 ms
Number of Programmer Segments:

3 Programs x 20 Segments
Control Type:

ON/OFF, PID-2-point, 3-point and 3-point stepping and continuous control
Power Supply:

24 VAC / DC, 90-250 VAC
Communications:

TTL, RS422 & RS485, Profibus-DP, Interbus
Panel Sealing:

IP65
Certifications:

CE
Software Tools:

Engineering Tool ET/KS 94, Simulation Tool SIM/KS 94

Downloads

Related products

  • Read more

    West 8170+ VMD & Temperature Single Loop Controller

    The 8170+ single loop controller is part of the Plus series range and has 3-point stepping control designed specifically for open loop, valve motor drive (VMD) applications.

    The 8170+ incorporates advanced tuning algorithms, with selectable pre-tune and self-tuning for easier setup. The self-tune also reduces output activity to an absolute minimum without compromising control quality, thereby reducing wear and tear on mechanical components such as valves, contactors and relays. In test, these controls have cut down valve oscillation from 30 to 40 times a minute to just a few. Pre-tune plus self-tuning has also been shown to get on control up to 3 times faster.

    In addition to the VMD outputs, further output options exist which can be designated as outputs for alarms, 24 VDC transmitter power supply, retransmit process value or setpoint.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Din Size
    West Control Solutions 8170+ 1/8
  • Read more

    CAL 9500P Programmable Temperature Controller

    The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.

    Styled for laboratory or industrial applications CAL9500P has an impact resistant smoked fascia with rubberised buttons with positive feedback. PID tuning is simple and efficient whilst the unique dAC function minimises overshoot. The integrated programmer function is ideal for applications requiring temperature profile control.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Din Size
    West Control Solutions CAL 9500P 1/16
  • Read more

    PMA KS 41-1 Continuous PID Temperature Controller

    The universal temperature controller KS 41-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.

    The KS 41-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.

    This controller is particularly well suited to the following industry applications:

    Furnaces and ovens
    Burners and boilers
    Plastics processing
    Driers

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Din Size
    West Control Solutions KS 41-1 1/8
  • Read more

    KS 94 Temperature Controller with Cascade Control

    The KS 94 single loop controller is configurable for ON/OFF control, PID control and motorised valve control. The output function can be configured for ?/Y/Off, position control, split-range control, and numerous 3-point combinations of switching/continuous control.

    Control modes are set-point, set-point/cascade, and programmer, each with the possibility of setpoint offset. The effect of offset can be additive e.g. reduced standby set-point or as a factor e.g. O2 correction or split load. Offset can be triggered by an external contact, whereby the value is defined via an analog signal or via an adjustable parameter.

    Get a Quote Data Sheet

    Button Text
    Manufacturer Series Din Size
    West Control Solutions KS 94 1/4