Wholesale distributor of pressure, temperature, flow, and level instrumentation since 1989.
Signal Conditions and Transmitters
Showing 1–12 of 13 results
-
600
These units convert a 4-20mA process current input into two identical isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels.
Button Text -
BusWorks 900MB Limit Alarm
This signal conditioner is a four-channel analog input module with four discrete outputs. It provides isolation between input, output, power, and network circuits. Network communication adheres to the industry-standard RS-485Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.
Button Text -
Flat Pack
These models convert sensor inputs to proportional process current or voltage output signals.
-
IntelliPack 800A
IntelliPack alarms compare inputs against userdefined limit setpoints to control built-in relays.
Each unit offers a selection of input ranges and alarm functions to handle a broad range of applications. As your needs change, you can easily reconfigure the unit for different ranges or functions. Alarm functions available on all models include on/off controller, limit alarm, window alarm, deviation alarm, rate-of-change alarm, and peak/valley detection.
Button Text -
IntelliPack 800T
The 811T transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.
Button Text -
microBlox uBTA
The uBTA carriers are used with Acromag’s microBlox® signal conditioning modules to create powerful alarms that also provide a voltage/current transmitter output. The plug-in modules offer the convenience of wireless field programming on a smartphone or tablet.
Button Text Button Text -
SP230
The SP233 model is a high-performance signal splitter that converts one millivolt or thermocouple sensor input into two proportional isolated 4-20mA control signals. Power is received from one or both output loop currents.
Button Text -
SP330
The SP333 is a high-performance signal splitter that converts one millivolt or thermocouple input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Power connects on a terminal block, a rail bus, or both for redundancy.
Button Text -
ST130
The ST132 is a low-cost two-wire transmitter that converts a millivolt or thermocouple sensor input to a proportional 4-20mA control signal. Power is received from the output loop current. The transmitter performs signal linearization, cold-junction compensation, and lead-break detection functions.
Button Text -
TT200
The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection.
Button Text -
TT230
The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection.
Button Text -
TT300
The TT336 model is a space-saving four-wire transmitter that isolates and converts a DC current or low voltage input to a proportional control signal. DC current and voltage output are both supported on a single model. An optional DIN rail bus can deliver primary or redundant power to multiple units without wiring.
Button Text